「Guide:Marlin/en」の版間の差分

提供：Kobe Makerspace
(ページの作成:「If your printer or motherboard version is different, proceed with the steps below.」)
(ページの作成:「Optional: commit the changes, and do this every time the config is changed. Provide a description of the changes. {{terminal|text= cd $root_dir/marlin git add Marlin git…」)
 
(同じ利用者による、間の2版が非表示)
14行目: 14行目:
 
}}
  
}}
   
−
Also clone example configurations (also for version 2.1.2.1), so we don't have to start from scratch.
 +
Clone example configurations (also for version 2.1.2.1), so we don't have to start from scratch.
 
{{terminal|text=
  
{{terminal|text=
 
git clone -b 2.1.2.1 https://github.com/MarlinFirmware/Configurations config
  
git clone -b 2.1.2.1 https://github.com/MarlinFirmware/Configurations config
20行目: 20行目:
   
 
== Find PlatformIO environment ==
  
== Find PlatformIO environment ==
−
Find the environment (a build preset/toolchain) to use with PlatformIO. We're compiling for Ender 3 v4.2.2 board, so use <code>STM32F103RE_creality</code> in "Build Marlin with PlatformIO"
 +
Find the environment (a build preset/toolchain) to use with PlatformIO. We're compiling for Ender 3 v4.2.2 board, so use <code>STM32F103RE_creality</code> in "Build with PlatformIO" section.
   
 
If your printer or motherboard version is different, proceed with the steps below.
  
If your printer or motherboard version is different, proceed with the steps below.
46行目: 46行目:
 
}}
  
}}
   
−
Use the example config.
 +
Use the example config:
 
{{terminal|text=
  
{{terminal|text=
 
cp $root_dir/config/config/examples/Creality/Ender-3/CrealityV422/{_Bootscreen.h,Configuration_adv.h,Configuration.h,_Statusscreen.h} marlin/Marlin/
  
cp $root_dir/config/config/examples/Creality/Ender-3/CrealityV422/{_Bootscreen.h,Configuration_adv.h,Configuration.h,_Statusscreen.h} marlin/Marlin/
 
}}
  
}}
   
  +
Optional: commit the changes, and do this every time the config is changed. Provide a description of the changes.
−
<div lang="ja" dir="ltr" class="mw-content-ltr">
  
−
オプション: 変更をコミットし、構成が変更されるたびにこれを実行します。 変更の説明を入力します。
  
 
{{terminal|text=
  
{{terminal|text=
 
cd $root_dir/marlin
  
cd $root_dir/marlin
58行目: 57行目:
 
git commit -m "Ender 3 example config"
  
git commit -m "Ender 3 example config"
 
}}
  
}}
−
</div>
  
   
  +
== Build with PlatformIO ==
−
<div lang="ja" dir="ltr" class="mw-content-ltr">
  
−
== PlatformIO で建てる ==
 +
Use the PlatformIO environment that we found before.
−
以前に見つけた PlatformIO プリセットを使用します。
  
 
{{terminal|text=
  
{{terminal|text=
 
cd $root_dir/marlin
  
cd $root_dir/marlin
 
$root_dir/pio/penv/bin/platformio run -e STM32F103RE_creality
  
$root_dir/pio/penv/bin/platformio run -e STM32F103RE_creality
 
}}
  
}}
−
</div>
  
   
  +
This builds a firmware file, and you can find it in the compilation output log:
−
<div lang="ja" dir="ltr" class="mw-content-ltr">
  
−
これによりファームウェア ファイルがビルドされ、コンパイル出力ログで確認できます：
  
 
{{terminal|text=
  
{{terminal|text=
 
RAM: [= ] 11.6% (used 7592 bytes from 65536 bytes)
  
RAM: [= ] 11.6% (used 7592 bytes from 65536 bytes)
76行目: 71行目:
 
Building .pio/build/STM32F103RE_creality/firmware-20231008-230629.bin
  
Building .pio/build/STM32F103RE_creality/firmware-20231008-230629.bin
 
}}
  
}}
−
</div>
  
   
  +
== Installation ==
−
<div lang="ja" dir="ltr" class="mw-content-ltr">
  
  +
Copy <code>.pio/build/STM32F103RE_creality/firmware-20231008-230629.bin</code> to
−
== インストール ==
  
  +
the SD card. Do not rename it, otherwise the printer may refuse to update if the name is the same as the current firmware.
−
<code>.pio/build/STM32F103RE_creality/firmware-20231008-230629.bin</code>をSDカードにコピーします。 名前を変更しないでください。名前が現在のファームウェアと同じ場合、プリンタがアップデートを拒否する可能性があります。SDカードを挿入し、プリンターをリセットします。 起動中に自動的に更新されるはずです。
  
  +
−
</div>
  
  +
Insert the SD card and reset the printer. It should update itself during the boot.

2024年1月30日 (火) 08:54時点における最新版

Install PlatformIO

root_dir=$PWD
export PLATFORMIO_CORE_DIR=$root_dir/pio
git clone https://github.com/platformio/platformio-core-installer
cd platformio-core-installer && python3 get-platformio.py

Clone Marlin

We clone the version 2.1.2.1, the latest at the time of writing this guide. 

git clone -b 2.1.2.1 https://github.com/MarlinFirmware/Marlin marlin
cd $root_dir

Clone example configurations (also for version 2.1.2.1), so we don't have to start from scratch. 

git clone -b 2.1.2.1 https://github.com/MarlinFirmware/Configurations config

Find PlatformIO environment

Find the environment (a build preset/toolchain) to use with PlatformIO. We're compiling for Ender 3 v4.2.2 board, so use STM32F103RE_creality in "Build with PlatformIO" section.

If your printer or motherboard version is different, proceed with the steps below.

Search for similar lines in ./Marlin/src/pins/pins.h file: 

grep CREALITY_V422 marlin/Marlin/src/pins/pins.h

./Marlin/src/pins/pins.h:575:  #include "stm32f1/pins_CREALITY_V422.h"
  / STM32F1
  / env:STM32F103RE_creality
  / env:STM32F103RE_creality_xfer
  / env:STM32F103RC_creality
  / env:STM32F103RC_creality_xfer
  / env:STM32F103RE_creality_maple

Choose the one that matches your board.

Configure

Optional: create a git branch specific for this printer, so all changes can be tracked and updated easily. 

cd $root_dir/marlin
git checkout -b ender-3

Use the example config: 

cp $root_dir/config/config/examples/Creality/Ender-3/CrealityV422/{_Bootscreen.h,Configuration_adv.h,Configuration.h,_Statusscreen.h} marlin/Marlin/

Optional: commit the changes, and do this every time the config is changed. Provide a description of the changes. 

cd $root_dir/marlin
git add Marlin
git commit -m "Ender 3 example config"

Build with PlatformIO

Use the PlatformIO environment that we found before. 

cd $root_dir/marlin
$root_dir/pio/penv/bin/platformio run -e STM32F103RE_creality

This builds a firmware file, and you can find it in the compilation output log: 

RAM:   [=         ]  11.6% (used 7592 bytes from 65536 bytes)
Flash: [===       ]  27.2% (used 142600 bytes from 524288 bytes)
Building .pio/build/STM32F103RE_creality/firmware-20231008-230629.bin

Installation

Copy .pio/build/STM32F103RE_creality/firmware-20231008-230629.bin to the SD card. Do not rename it, otherwise the printer may refuse to update if the name is the same as the current firmware.

Insert the SD card and reset the printer. It should update itself during the boot.

「https://asav.dev/mkwiki/index.php?title=Guide:Marlin/en&oldid=183」から取得